Valentine One Radar Locator
Mike Valentine




SSL Certificate
More Power: Performance upgrade may be available for your V1
Enter serial number

Valentine One Store
  30 Day Money Back Guarantee
 
 
Valentine One® Radar Locator with Laser Warning
Item 20015

Price: $399.00
Quantity:    
 
FULL COVERAGE AGAINST RADAR AND LASER
  Includes: windshield mount; visor mount; lighter adapter; power cord, coiled (2 ft. stretches to 8 ft.); power cord, straight (8 ft.); direct-wire power adapter; wiring-harness connector; owner's manual; spare suction cups; spare fuse. 30-day Money-Back Guarantee.
 
 
V1connection, for Android
Item 20230

Price: $49.00
Quantity:    
 
INTRODUCING
THE THREAT PICTURE for Android
  V1connection is a Bluetooth®-enabled module about the size of your thumb that wirelessly links V1 to your compatible Android device. Choose among four information screens at any time: one reproduces V1's front-panel warnings in real time, plus frequency of the Priority Alert; another displays up four locator-arrow sets in a quadrant array, one for each radar band enabled and one for laser if fewer than four radar bands are active; another shows the continuously-updated Threat Picture featuring our new Arrow-in-the-Box concept, a revolutionary way of analyzing radar threats; yet another screen lists all threats within range, with direction, band ID and frequency for each, arranged by length of tracking time. A yellow "Box" symbol appears for each threat "in the Box."

V1connection also acts as the Master Controller for your V1 system, allowing you to revise programming, adjust SAVVY settings, change muting and computer modes, activate dark mode, save custom programming profiles for different trips, and more, all from your Android device.

Installation: Using the short, 3-inch cable (included), connect the RJ11 jack of the module to the ACC jack of V1's power adapter. Then download the free app, called V1connection, the app, at Google's Play Store on your device.

Important compatibility requirements: Click here for Android compatibility

V1connection works with all V1s but its full capability is available only from V1s with ESP. (Check for the ESP logo on the front panel below the Control Knob.) On pre-ESP V1s, or when using a pre-ESP Concealed Display or Remote Audio Adapter, your handheld will serve as a wireless remote display of all of V1's front-panel warnings, but other functions and screens are unavailable.

Includes: Power cord, 3-inch; beaded tie strap; self-stick wire clip.
 
 
V1connection LE, for iPhone®
Item 20232

Price: $49.00
Quantity:    
 
INTRODUCING
THE THREAT PICTURE for iPhone®/iPad®/iPod touch®
  V1connection LE is a Bluetooth®-enabled module about the size of your thumb that wirelessly links V1 to your compatible iPhone/iPad/iPod touch. Choose among four information screens at any time: one reproduces V1's front-panel warnings in real time, plus frequency of the Priority Alert; another displays up four locator-arrow sets in a quadrant array, one for each radar band enabled and one for laser if fewer than four radar bands are active, another shows the continuously-updated Threat Picture featuring our new Arrow-in-the-Box concept, a revolutionary way of analyzing radar threats; yet another screen lists all threats within range, with direction, band ID and frequency for each, arranged by length of tracking time. A yellow "Box" symbol appears for each threat "in the Box."

V1connection LE also acts as the Master Controller for your V1 system, allowing you to revise programming, adjust SAVVY settings, change muting and computer modes, activate dark mode, save custom programming profiles for different trips, and more, all from your compatible iPhone/iPad/iPod touch.

Installation: Using the short, 3-inch cable (included), connect the RJ11 jack of the module to the ACC jack of V1's power adapter. Then download the free app, called V1connection, the app, from the App Store on your device.

Important compatibility requirements: Click here for Apple iOS compatibility

V1connection LE works with all V1s but its full capability is available only from V1s with ESP. (Check for the ESP logo on the front panel below the Control Knob.) On pre-ESP V1s, or when using a pre-ESP Concealed Display or Remote Audio Adapter, your handheld will serve as a wireless remote display of all of V1's front-panel warnings, but other functions and screens are unavailable.

Includes: Power cord, 3-inch; beaded tie strap; self-stick wire clip.
 
 
SAVVY®
Item 20220

Price: $69.00
Quantity:    
 
A STREETWISE
PARTNER FOR V1
  So you can keep your attention where it belongs, SAVVY turns down the volume of V1’s alerts automatically at low speeds. SAVVY has just one control, a thumb wheel to set a speed threshold. Below your set point, the audio comes through on V1’s Muted Volume (set this with V1’s Control Lever). Above the threshold you hear the normal loudness you’ve set with the V1’s Control Knob.

SAVVY stays nearly out of sight down near your steering column where it serves as V1’s power source. It replaces the Lighter Adapter or, in “hiddenwire” installations, the Direct-wire Power Adapter. Just plug SAVVY into the OBD diagnostic port, standard on every new car and light truck built since January 1, 1996. Then plug V1’s power cord into one of two RJ-11 jacks (the other works with the Concealed Display or other V1 accessories). The thumbwheel has eight setting between 15 and 65 mph. Choose one, or select AUTO, which mutes all alerts, or choose NONE to eliminate automatic muting.

SAVVY is ideal for those who want to hide V1’s power cord. Two wire clips and a beaded tie strap are included to secure the power cord to V1. SAAVY fits in the palm of your hand and weights just 2.2 ounces. Black only.

NOTE:   SAVVY draws a small current from the car battery even with the ignition switched off.   Use caution in vehicles with weak batteries, or that go for long periods without being driven.  Click here for a list of cars with SAVVY compatibility issues.

 
 
Grand Touring Package
Item 00040

Price: $449.00
Quantity:    
 
WHAT MIKE USES -
V1 PLUS SAVVY
  Includes Valentine One Radar locator with Laser warning (item 20015) and SAVVY (item 20220) in a specially-priced package. Please note: returned items originally sold in this package will be refunded as follows: V1 alone $380; SAVVY alone $50; the complete package, $449.

NOTE:   SAVVY draws a small current from the car battery even with the ignition switched off.   Use caution in vehicles with weak batteries, or that go for long periods without being driven.  Click here for a list of cars with SAVVY compatibility issues.

 
 
Carrying Case
Item 20215

Price: $29.00
Quantity:    
 
CARRYING CASE FOR V1 DEFENSE GEAR
  Made of tough, molded half-shells, cushioned on the outside with a textured, non-marring skin, and closed securely with a fine-pitch zipper. Protects V1 in its own padded dock. Room for windshield mount, visor mount, lighter adapter, and two cords. Special anti-distortion panel shields suction cups. Three mesh partitions. Full, anti-rattle liner. Fits all V1 versions. Embossed V1 logo on "top" so you know which side is up when opening. Nylon grab handle. 9.4 L x 6.3 W x 2.3 H; weighs just 10.5 oz. Black only.
 
 
Concealed Display with ESP and Band Identification
Item 20110

Price: $39.00
Quantity:    
 
A BIG STEP TOWARD PRIVACY...
  Tired of other drivers crowding up behind so they can live off your detector warnings? Or maybe you just prefer to keep a low profile. Here's a remote display that partners with V1, moving all the visual warnings to a location of your choosing while V1 continues on duty in the dark mode.

The Concealed Display may be attached directly to the Lighter Adapter (see Note below). Or you may mount it anywhere using self-stick interlocking fasteners, then connect with the power cord (included) to either the Lighter Adapter or Direct-Wire Power Adapter (both included with V1).

Mute and Mode selection are controlled by the Control Knob on the Display (On-Off and Volume adjustments remain on V1).

This compact module measures only 1.0-in. H x 2.5-in. W x 1.2-in. D. Weight: 1.0 ounces. Satin-black finish matches V1.

Note: This "attachment" is not possible with the old single-wire Lighter Adapter used up through 1997. Replace with Adapter (Item 20319) as used on today's V1.

Includes: Concealed-display module; Power cord, 8-ft.; Power cord, 3-in.; Display-module backplate (for mounting); self-stick interlocking fasteners; articulated bracket (swivel) for mounting to the '2-Port Lighter Adapter—Swivel'
 
 
Remote Audio Adapter with ESP
Item 20200

Price: $49.00
Quantity:    
 
MOTORCYCLIST? HEADPHONE USER?
  Here's a way to move V1's audio warnings anywhere you want them. Compact module has a speaker and two headphone jacks (one mini, 3.5mm; and one micro, 2.5mm). You also get remote control of all Control Knob and Lever functions including mute and computer modes; handy when you've mounted V1 out of reach. Connects with standard V1 power cords.

Compact case measures 0.9-in. H x 2.5-in. W x 1.6-in. D. Weight: 1.6 ounces.

Includes: Power cord, 8-ft.
 
Questions and Orders 1-800-331-3030 / M-F 9:00 AM to 5:30 PM ET / 10280 Alliance Road, Cincinnati, OH 45242-4710
© , Valentine Research, Inc. All rights reserved.