Mike Valentine

Does your V1 have Junk-K Fighter?
Enter serial number

 

OUR COMPLETE PRICE LIST

 
 
FULL COVERAGE AGAINST RADAR AND LASER
Valentine One® Radar Locator with Laser Warning
Item 20015

Price: $399.00
  Includes: windshield mount; visor mount; lighter adapter; power cord, coiled (2 ft. stretches to 8 ft.); power cord, straight (8 ft.); direct-wire power adapter; wiring-harness connector; owner's manual; spare suction cups; spare fuse. 30-day Money-Back Guarantee.
 
 
INTRODUCING
THE THREAT PICTURE for iPhone®/iPad®/iPod touch® and Bluetooth Low Energy-compatible Android devices
V1connection LE, for iOS and Android
Item 20232

Price: $49.00
  V1connection LE is a Bluetooth®-enabled module about the size of your thumb that wirelessly links V1 to your compatible device. Choose among four information screens at any time: one reproduces V1's front-panel warnings in real time, plus frequency of the Priority Alert; another displays up four locator-arrow sets in a quadrant array, one for each radar band enabled and one for laser if fewer than four radar bands are active, another shows the continuously-updated Threat Picture featuring our new Arrow-in-the-Box concept, a revolutionary way of analyzing radar threats; yet another screen lists all threats within range, with direction, band ID and frequency for each, arranged by length of tracking time. A yellow "Box" symbol appears for each threat "in the Box."

V1connection LE also acts as the Master Controller for your V1 system, allowing you to revise programming, adjust SAVVY settings, change muting and computer modes, activate dark mode, save custom programming profiles for different trips, and more, all from your compatible device.

Installation: Using the short, 3-inch cable (included), connect the RJ11 jack of the module to the ACC jack of V1's power adapter. Then download the free app, called V1connection, the app, from the App Store on your device.

Important compatibility requirements:
Click here for Apple iOS compatibility
Click here for Android compatibility

V1connection LE works with all V1s but its full capability is available only from V1s with ESP. (Check for the ESP logo on the front panel below the Control Knob.) On pre-ESP V1s, or when using a pre-ESP Concealed Display or Remote Audio Adapter, your handheld will serve as a wireless remote display of all of V1's front-panel warnings, but other functions and screens are unavailable.

Includes: Power cord, 3-inch; beaded tie strap; self-stick wire clip.
 
 
INTRODUCING
THE THREAT PICTURE for Android
V1connection, for Android
Item 20230

Price: $49.00
  V1connection is a Bluetooth®-enabled module about the size of your thumb that wirelessly links V1 to your compatible Android device. Choose among four information screens at any time: one reproduces V1's front-panel warnings in real time, plus frequency of the Priority Alert; another displays up four locator-arrow sets in a quadrant array, one for each radar band enabled and one for laser if fewer than four radar bands are active; another shows the continuously-updated Threat Picture featuring our new Arrow-in-the-Box concept, a revolutionary way of analyzing radar threats; yet another screen lists all threats within range, with direction, band ID and frequency for each, arranged by length of tracking time. A yellow "Box" symbol appears for each threat "in the Box."

V1connection also acts as the Master Controller for your V1 system, allowing you to revise programming, adjust SAVVY settings, change muting and computer modes, activate dark mode, save custom programming profiles for different trips, and more, all from your Android device.

Installation: Using the short, 3-inch cable (included), connect the RJ11 jack of the module to the ACC jack of V1's power adapter. Then download the free app, called V1connection, the app, at Google's Play Store on your device.

Important compatibility requirements: Click here for Android compatibility

V1connection works with all V1s but its full capability is available only from V1s with ESP. (Check for the ESP logo on the front panel below the Control Knob.) On pre-ESP V1s, or when using a pre-ESP Concealed Display or Remote Audio Adapter, your handheld will serve as a wireless remote display of all of V1's front-panel warnings, but other functions and screens are unavailable.

Includes: Power cord, 3-inch; beaded tie strap; self-stick wire clip.
 
 
A STREETWISE
PARTNER FOR V1
SAVVY®
Item 20220

Price: $69.00
  So you can keep your attention where it belongs, SAVVY turns down the volume of V1’s alerts automatically at low speeds. SAVVY has just one control, a thumb wheel to set a speed threshold. Below your set point, the audio comes through on V1’s Muted Volume (set this with V1’s Control Lever). Above the threshold you hear the normal loudness you’ve set with the V1’s Control Knob.

SAVVY stays nearly out of sight down near your steering column where it serves as V1’s power source. It replaces the Lighter Adapter or, in “hiddenwire” installations, the Direct-wire Power Adapter. Just plug SAVVY into the OBD diagnostic port, standard on every new car and light truck built since January 1, 1996. Then plug V1’s power cord into one of two RJ-11 jacks (the other works with the Concealed Display or other V1 accessories). The thumbwheel has eight setting between 15 and 65 mph. Choose one, or select AUTO, which mutes all alerts, or choose NONE to eliminate automatic muting.

SAVVY is ideal for those who want to hide V1’s power cord. Two wire clips and a beaded tie strap are included to secure the power cord to V1. SAAVY fits in the palm of your hand and weights just 2.2 ounces. Black only.

NOTE:   SAVVY draws a small current from the car battery even with the ignition switched off.   Use caution in vehicles with weak batteries, or that go for long periods without being driven.  Click here for a list of cars with SAVVY compatibility issues.

 
 
WHAT MIKE USES -
V1 PLUS SAVVY
Grand Touring Package
Item 00040

Price: $449.00
  Includes Valentine One Radar locator with Laser warning (item 20015) and SAVVY (item 20220) in a specially-priced package. Please note: returned items originally sold in this package will be refunded as follows: V1 alone $380; SAVVY alone $50; the complete package, $449.

NOTE:   SAVVY draws a small current from the car battery even with the ignition switched off.   Use caution in vehicles with weak batteries, or that go for long periods without being driven.  Click here for a list of cars with SAVVY compatibility issues.

 
 
CARRYING CASE FOR V1 DEFENSE GEAR
Carrying Case
Item 20215

Price: $29.00
  Made of tough, molded half-shells, cushioned on the outside with a textured, non-marring skin, and closed securely with a fine-pitch zipper. Protects V1 in its own padded dock. Room for windshield mount, visor mount, lighter adapter, and two cords. Special anti-distortion panel shields suction cups. Three mesh partitions. Full, anti-rattle liner. Fits all V1 versions. Embossed V1 logo on "top" so you know which side is up when opening. Nylon grab handle. 9.4 L x 6.3 W x 2.3 H; weighs just 10.5 oz. Black only.
 
 
A BIG STEP TOWARD PRIVACY...
Concealed Display with ESP and Band Identification
Item 20110

Price: $39.00
  Tired of other drivers crowding up behind so they can live off your detector warnings? Or maybe you just prefer to keep a low profile. Here's a remote display that partners with V1, moving all the visual warnings to a location of your choosing while V1 continues on duty in the dark mode.

The Concealed Display may be attached directly to the Lighter Adapter (see Note below). Or you may mount it anywhere using self-stick interlocking fasteners, then connect with the power cord (included) to either the Lighter Adapter or Direct-Wire Power Adapter (both included with V1).

Mute and Mode selection are controlled by the Control Knob on the Display (On-Off and Volume adjustments remain on V1).

This compact module measures only 1.0-in. H x 2.5-in. W x 1.2-in. D. Weight: 1.0 ounces. Satin-black finish matches V1.

Note: This "attachment" is not possible with the old single-wire Lighter Adapter used up through 1997. Replace with Adapter (Item 20319) as used on today's V1.

Includes: Concealed-display module; Power cord, 8-ft.; Power cord, 3-in.; Display-module backplate (for mounting); self-stick interlocking fasteners; articulated bracket (swivel) for mounting to the '2-Port Lighter Adapter—Swivel'
 
 
Coiled Power Cord
Item 20302

Price: $12.00
  Power cord: coiled, 1-foot, stretches to 6 feet.
 
 
Coiled Power Cord
Item 20322

Price: $12.00
  Power cord: coiled, 2-feet, stretches to 8 feet; Same as included with V1.
 
 
MOTORCYCLIST? HEADPHONE USER?
Remote Audio Adapter with ESP
Item 20200

Price: $49.00
  Here's a way to move V1's audio warnings anywhere you want them. Compact module has a speaker and two headphone jacks (one mini, 3.5mm; and one micro, 2.5mm). You also get remote control of all Control Knob and Lever functions including mute and computer modes; handy when you've mounted V1 out of reach. Connects with standard V1 power cords.

Compact case measures 0.9-in. H x 2.5-in. W x 1.6-in. D. Weight: 1.6 ounces.

Includes: Power cord, 8-ft.
 
 
Straight Power Cord
Item 20311

Price: $10.00
  Power cord: straight, 8-feet; Same as included with V1.
 
 
Straight Power Cord
Item 20315

Price: $4.00
  Power cord: straight, 3-inch; Same as included with Concealed Display.
 
 
2-Port Lighter Adapter
Item 20319

Price: $10.00
  Same as the Adapter included with today’s V1; electrically compatible with all V1’s. Use with Item 20320 to mount the Concealed Display.
 
 
Articulated Bracket
Item 20320

Price: $4.00
  Snaps on to 2-Port Lighter Adapter, Item 20319, for mounting Concealed Display, Item 20110.
 
 
Lighter Power Adapter
Item 20304

Price: $10.00
  Same as the Adapter included with early V1s; has single RJ11 connector.
 
 
2-Port Lighter Power Adapter
Item 20314

Price: $10.00
  Not available; replaced by Item 20319. Fuse for Item 20314 is available—use Item 20303. To mount the Concealed Display, use Item 20320 with Item 20319.
 
 
2 amp. Mini Blade Fuse
Item 20321

Price: $1.00
  Replacement fuse for 2-Port Lighter Adapter—Swivel (Item 20319). Not compatible with the following Lighter Adapters: Items 20314 and 20304.
 
 
1 amp. 5mm X 20mm Cylinder Fuse
Item 20303

Price: $1.00
  Replacement fuse for Direct-Wire Power Adapter and for the following Lighter Power Adapters: Item 20314 and Item 20304.
 
 
Direct-Wire Power Adapter
Item 20305

Price: $13.00
  Same as the Adapter included with the V1; For permanent installation that draws power directly from vehicle's electrical system instead of the lighter socket. Also includes Fuse (Item 20321), Wiring Harness Connector (Item 20310) and Self-Stick Interlocking Fasteners (Item 20301).

Dimensions - 1.1-in. H x 1.2-in. W x 0.8-in. D. Weight: 1.8 ounces.
Length of leads: hot wire - 36.2-in.; ground wire - 16.1-in.
 
 
Direct-Wire Power Adapter Kit
Item 00030

Price: $19.00
  Direct-wire power adapter (Item 20305), Straight Power Cord (Item 20311), Fuse (Item 20321), Wiring Harness Connector (Item 20310) and Self-Stick Interlocking Fasteners (Item 20301) together at a reduced price.
 
 
BOB, The Brown-Out Booster
Item 20221

Price: $25.00
  Maintains power to V1 during engine restarts. Installs in line between V1 and the 12-V power source. Includes 3-inch power cord and two selfstick interlocking fasteners.

Dimensions: 1.0-in H x 1.7-in W x 1.2-in D; Weight: 0.5 ounces.
 
 
Visor Mount
Item 20308

Price: $10.00
  Same as included with V1.
 
 
Windshield Mount
Item 20306

Price: $10.00
  Same as included with V1: includes release bar and two suction cups.
 
 
Suction Cups
Item 20307

Price: $1.00
  Two pairs; same as currently included with V1.
 
 
Self-Stick Interlocking Fasteners
Item 20301

Price: $1.00
  Same as included with V1.
 
 
Owner's Manual
Item 20309

Price: $1.00
  Valentine One Owner's Manual.
 
 
Wiring Harness Connector
Item 20310

Price: $1.00
  Same as included with V1.
 
 
Lighter Power Adapter with Mode Memory
Item 20210

Price: $29.95
  Use with early V1s so detector, when switched on, starts up in the last mode selected when the unit was switched off. Use only with V1 serial numbers XXXXXX0300 to XXXXXX0399.
 
 
Direct-Wire Power Adapter with Mode Memory
Item 20211

Price: $29.95
  Use with early V1s so detector, when switched on, starts up in the last mode selected when the unit was switched off. Also includes Fuse (Item 20303) and Wiring harness connector (Item 20310). Use only with V1 serial numbers XXXXXX0300 to XXXXXX0399.
 
 
Mode Memory Package
Item 00020

Price: $49.95
  Item 20210 and Item 20211 together at a reduced price. Use only with V1 serial numbers XXXXXX0300 to XXXXXX0399.